• Хона
  • Чораҳои эҳтиеткори

Nov . 11, 2024 14:41 Бозгашт ба рӯйхат

Чораҳои эҳтиеткори

Дар чархи панҷуми вазнин, as a key component connecting the tractor and semi-trailer, has important usage precautions and maintenance for ensuring transportation safety and extending its service life. The following is a detailed explanation of the precautions and maintenance of heavy-duty towing seats.

 

1、 Precautions for Using Heavy Duty Fifth Wheel          

 

Standardized operation:

 

When connecting a semi-trailer, it is necessary to ensure that the connection between the tractor and semi-trailer is standardized in all aspects, with special attention paid to the operation of attaching and detaching the towing seat, which must be carried out on a solid and flat ground.

 

When hanging, the semi-trailer skateboard must be at the same level as the towing seat panel, or slightly lower (up to 50mm) than the towing seat panel, while paying attention to the height changes that may occur when using air suspension.

 

security check:

 

After the connection is completed, the tractor should be slightly moved forward to check if the connection is good. Only after confirming that the traction seat locking mechanism is in the locked state can the vehicle be driven.

 

Regularly check the wear of the towing seat and towing pin, as well as the tightness of the connecting components, to ensure safe and reliable connection.

 

Avoid overloading:

 

Strictly abide by the load limits of tractor and semi-trailer, avoid overloading transportation, and prevent heavy tractor seats from bearing excessive pressure, accelerating their wear and aging.

 

Environmental adaptability:

 

When used in complex road conditions and harsh environments, special attention should be paid to the adaptability and stability of чархи панҷуми вазнин, avoiding hanging operations in areas with steep slopes, and preventing traffic accidents caused by loose or detached connections.

 

2、 Heavy Duty Fifth Wheel Maintenance and Upkeep         

 

Regular lubrication:

 

Regularly lubricate the чархи панҷуми вазнин to reduce friction and wear between components. It is recommended to brush/add lubricating grease every 2 weeks or every 5000 kilometers to ensure sufficient lubrication when the towing seat comes into contact with the towing vehicle or trailer.

 

Cleaning and maintenance:

 

Regularly clean the чархи панҷуми вазнин to remove dust and dirt, and prevent poor connection or damage caused by debris blockage.

 

Component inspection:

 

Regularly inspect the components of the чархи панҷуми вазнин, including the locking mechanism, sliding plate, connecting pin, etc. If severely worn parts are found, they should be replaced in a timely manner to ensure the normal operation of the traction seat.

 

Professional maintenance:

 

When a malfunction or damage is found in the towing seat, professional maintenance personnel should be contacted promptly for repair. Avoid disassembling or repairing on your own to prevent greater damage or safety hazards.

 

In summary, the precautions and maintenance of чархи панҷуми вазнин are crucial for ensuring transportation safety and extending their service life. During use, strict adherence to standard operating requirements and strengthened safety inspections should be carried out; In terms of maintenance, regular lubrication, cleaning, and component inspection should be carried out to ensure that the чархи панҷуми вазнин is always in good working condition.

 

Ҳамчун як чархи панҷуми пӯлоди рехташуда, доираи тиҷорати мо хеле васеъ аст. Мо дорем чархи панҷуми ним боркаш, чархи панҷуми вазнин, Ҳолланд қисмҳои чархи панҷум, чархи панҷум, чархи 5-ум, ҷузъҳои трейлери мошини боркаш, панчум ва чархи панчумро автоматй кунонда ва ғайра . Дар нархи чархи панҷуми вазнин дар ширкати мо оқилона мебошанд. Агар шумо ба маҳсулоти мо ҷолиб бошед, бо мо тамос гиред!

Мубодила
Баъдӣ:

Агар шумо ба маҳсулоти мо таваҷҷӯҳ дошта бошед, шумо метавонед маълумоти худро дар ин ҷо гузоред ва мо ба зудӣ бо шумо дар тамос хоҳем шуд.


tgTajik